CONVERTO ROLL OFF TRAILER
A link to a related product 'Roll Off' is provided above. 'Home' will enable you to visit all product links.
Above : A custom Semi Roll Off Trailer with full fenders (standard) and an air lift 3rd axle. Covered control box with left hand controls.
Trailer and Table information
Semi Trailer Roll Off Hoist. Available in 24', 26', 28', 30' trailer lengths with outside rail standard. Inside/outside rails, sting tail or deadlift hoist systems available.
| Model | LTH-60 | LTH-60 Inside Outside |
LTH-50 Dead Lift |
LTH-50 Stingtail |
| Rated Capacity | 60000 # | 60000 # | 50000 # | 50000 # |
| Hoist Frame | 4" x 10" x 1/2" Tubing one Piece | |||
| Cable Sheaves | 10" Dia. W/Bronze Bushing Reeving-12" Nose | |||
| Inside Frame | 34 3/4" | |||
| Outside Frame | 35 1/2" | 35 3/4" | 35" | 35 1/2" |
Cylinders
- Hoist cylinders 7", three stage double acting telescopic manufacture
- Reever Cylinders all 7" bore, single stage double acting
- Reever Cylinders are chrome alloy: no plating to flake off
Frame
- Automatic container release lock systems
- All Rollers 4" O.D. with bronze bushings
- 7/8" steel core cable (conventional)
- Electroline hook end 1 1/4 wedge socket anchor end (conventional)
- Full width tail roller on outside rail systems
- Maximum 50 degree dump angle
- Hoist rails one piece construction, 10" x 4" x 1/2" structural tubing
- Flame rail 16" -36 lb. wide flange boxed I (eye) beam
- Hinge shaft 2 1/2" diameter free floating
- Zerk fittings at all wear points
Trailer info
- Full fenders standard
- Light on rear
- Consult factory for multiple axles
- 24" standard king pin setting, optional locations available
- Dayton 5 spoke wheels (conventional)
- 10:00 x 20 12 ply rated tires (conventional)
- Rockwell TN-4670 - Q5" round axle beams
- Hutchens & Son #7700T suspension with 8-leaf arch spring
- Regulation brakes: S-Cam type, 16 1/2 x 7 x 3/4 with outside control ABS
- Homan or Newway landing gear, 150000 lb. static load capacity
- Mud flaps mounted at rear of tandem
- Optional flaps, tires, wheels available
Hydraulics
- Operating Pressure: 1850 PSI
- Valve 2 spool, 4 way, with built in pressure relief on standard unit (3 spool valve standard on sting tail)
- Controls / Valve located at left front corner of trailer
- Gas or diesel driven auxiliary power units available: contact factory
